Lift Maintenance and Repairs in Blackpool

Lift Engineers for Blackpool and the Fylde Coast

Blackpool’s lifts work hardest when the town is busiest, in hotels, holiday flats, attractions and seafront buildings. We maintain and repair lifts across Blackpool and the Fylde Coast, and we understand how the seasons and the sea air affect them.

We’re independent and look after all the major makes.

Two lift engineers inspecting an elevator shaft during maintenance work

Hotels and Guest Houses

In a hotel, a broken lift during the summer or the Illuminations means unhappy guests and bad reviews. We plan servicing and bigger repairs for the quieter months, so the lift is in good shape before the busy season.

Lift service engineer

Salt Air and Corrosion

Sea air is hard on lift equipment. Salt speeds up corrosion on door tracks, external platform lifts and electrical contacts, especially in buildings on or near the seafront. We check for corrosion on every visit and recommend protective measures or replacement parts before small problems turn into breakdowns.

Lift maintenance engineer servicing a commercial lift in an office building

Outdoor Platform Lifts

External platform lifts on the coast face wind, rain and salt. We specify weather-resistant equipment for new installations and pay close attention to drainage, seals and moving parts during servicing.

Lift engineers carrying out a LOLER inspection

Holiday Flats and Apartments

Lifts in holiday lets and apartment blocks see heavy use in season and little out of it. We set service visits to suit that pattern and keep records ready for your insurer.

Two lift engineers working inside an elevator shaft during maintenance

Servicing and LOLER

We base service frequencies on the manufacturer’s instructions and how much the lift is used. Lifts that carry people need a LOLER thorough examination at least every six months. We’ll handle any repairs the examiner’s report asks for.

overhead view lift engineer working on a passenger lift

Breakdowns

Doors cause most breakdowns, followed by levelling and controller faults. On the coast, corrosion adds to the list. We’ll give you a realistic arrival time and tell you if parts are needed.

Aerial view of Blackpool and surrounding areas along the Fylde Coast

Lift Services Across the Fylde Coast

We cover Blackpool along with Bispham, North Shore, South Shore, Marton, Layton, Anchorsholme, Staining and Carleton. See all the areas we cover.

Looking for a lift for your home? See our home lift installation in Lytham St Annes.

Need a lift engineer in Blackpool? Call 01254 775187 or send us a message.

Frequently Asked questions

Can we switch the lift off over winter?

If the building is closed, the lift can be safely isolated. Get it serviced and checked before you reopen, and make sure any LOLER examination due in the meantime still takes place.

Stainless steel, galvanised steel and marine-grade coatings stand up to sea air far better than standard painted steel.

Yes. New wall panels, flooring, ceiling, LED lighting and mirrors can transform the look of a lift without touching the mechanics.

Often, yes. Platform lifts and compact passenger lifts can fit into smaller buildings. They’ll usually need Building Regulations approval.

Yes. Under BS EN 81-28, the alarm must connect a trapped passenger to a rescue service that can respond at any time.

Usually, yes. A new controller can bring better reliability and smoother running while keeping the existing car and shaft.

Often, yes, by arrangement, so guests aren’t disturbed.

Your contractor should hold common spares. For a busy hotel lift, keeping a few key wear parts on site can shorten breakdowns.